SGI Origin 200

From Nekochan
Revision as of 23:11, 19 March 2009 by Regan russell (Talk | contribs) (Related techpubs.sgi.com documentation)

Jump to: navigation, search

Introduction

Related techpubs.sgi.com documentation

Origin 200 and Origin 200 GIGAchannel Maintenance Guide (document number: 007-3709-002)

Origin200 and Origin200 GIGAchannel Owner's Guide (document number: 007-3708-002 )

Architecture

Hardware aggregator

Sample hinv

Location: /hw/module/1/slot/MotherBoard/node
  PIMM_225_2M_2P Board: barcode HTP839     part 013-2382-002 rev  B
Location: /hw/module/1/slot/io7/xbox_dualxtown
  XBOX_DUALXTOWN Board: barcode GKK426     part 030-1252-001 rev  F
Location: /hw/module/1/slot/io1/MotherBoard
        XBOX_EXT Board: barcode GRY731     part 030-1264-001 rev  C
            IP29 Board: barcode HTR389     part 030-1389-001 rev  A
Location: /hw/module/1/slot/io1/MotherBoard/pci/2
[missing info:  page A data not available] Laser 000000c59e74
Location: /hw/module/1/slot/io2/mscsi
           MSCSI Board: barcode FTN041     part 030-1281-001 rev  D
Location: /hw/module/1/slot/io3/menet
           MENET Board: barcode GGF931     part 030-0873-003 rev  G
Location: /hw/module/1/slot/io4/mscsi
           MSCSI Board: barcode GGE344     part 030-1243-001 rev  F
2 225 MHZ IP27 Processors
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 3.4
CPU 0 at Module 1/Slot 1/Slice A: 225 Mhz MIPS R10000 Processor Chip (enabled) 
  Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz  Tap 0x9
CPU 1 at Module 1/Slot 1/Slice B: 225 Mhz MIPS R10000 Processor Chip (enabled) 
  Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz  Tap 0x9
Main memory size: 1152 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Memory at Module 1/Slot 1: 1152 MB (enabled)
  Bank 0 contains 128 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 2: Version QL1040B (rev. 2), single ended
Integral SCSI controller 9: Version QL1040B (rev. 2), single ended
Integral SCSI controller 11: Version QL1040B (rev. 2), differential
Integral SCSI controller 10: Version QL1040B (rev. 2), single ended
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  CDROM: unit 6 on SCSI controller 1
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 12: Version QL1040B (rev. 2), single ended
Integral SCSI controller 13: Version QL1040B (rev. 2), differential
Integral SCSI controller 14: Version QL1040B (rev. 2), differential
Integral SCSI controller 15: Version QL1040B (rev. 2), differential
Integral SCSI controller 16: Version QL1040B (rev. 2), differential
Integral SCSI controller 8: Version QL1040B (rev. 2), differential
Integral SCSI controller 5: Version QL1040B (rev. 2), differential
Integral SCSI controller 6: Version QL1040B (rev. 2), differential
Integral SCSI controller 7: Version QL1040B (rev. 2), differential
IOC3/IOC4 serial port: tty6
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty8
IOC3 parallel port: plp1
Gigabit Ethernet: eg0, module 1, PCI slot 6, firmware version 12.4.10
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Fast Ethernet: ef2, version 1, module 1, slot io3, pci 1
Fast Ethernet: ef1, version 1, module 1, slot io3, pci 0
Fast Ethernet: ef3, version 1, module 1, slot io3, pci 2
Fast Ethernet: ef4, version 1, module 1, slot io3, pci 3
Origin PCI XIO board, module 1 slot 7: Revision 4
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
Origin 200 base I/O, module 1 slot 1
Origin MENET board, module 1 slot 3: Revision 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 5
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 6
  PCI Adapter ID (vendor 0x1112, device 0x2200) PCI slot 7
Origin MSCSI board, module 1 slot 2: Revision 3
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3
Origin MSCSI board, module 1 slot 4: Revision 3
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.150
IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.150


External links (See also)

You are urged to read and understand SGI documentation before posting

Origin 200 and Origin 200 GIGAchannel Maintenance Guide

Origin200 and Origin200 GIGAchannel Owner's Guide